Sink Repair in Richardson, TX
We repair dripping faucets, loose handles, leaks, and sink stoppers in Richardson.
A towel beneath the cabinet and a firmer turn of the faucet handle are sensible first steps when you hear a drip or see water around the sink. They can catch a small spill and sometimes settle a handle left slightly open, but they cannot renew a worn seal or stop a split supply tube. We trace the water to the faucet, drain, supply line, or shutoff valve so the repair matches the fault.
Water can travel from a small fitting behind the sink bowl to the cabinet floor, wall, or adjacent room before it becomes obvious. We repair leaking connections, worn faucet parts, loose handles, and sink stoppers that no longer hold water. A faucet drip into the basin can usually wait for a scheduled repair, but water inside the cabinet or a shutoff valve that will not close should not wait because it can damage wood, drywall, and stored items.
Dripping faucet and wet cabinet
“My faucet will not stop dripping” often points to a worn internal seal or cartridge, while “the handle keeps spinning” can mean the handle connection has worn down. “There is water under my sink” may come from a supply tube, the drain connection, or water running down from the faucet base. A faucet that sprays sideways can have a clogged aerator, a damaged spout, or a loose part at the tip.
“The sink will not hold water” describes another common problem with the stopper. The customer name for that piece is the sink plug; we may identify the failed part as the pop-up assembly after checking the linkage and drain opening. These symptoms can look alike from the counter, but the failed parts, access inside the cabinet, and repair work can be very different.
Sink fixture inspection
At a sink fixture inspection, we run hot and cold water, check the faucet base, handle movement, spout, aerator, drain flange, stopper, supply tubes, and shutoff valves. We look for moisture on the cabinet floor and use the water meter or visible pipe connections when a leak may be hidden. Where access allows, we check supply pressure because most residential plumbing is normally maintained between 40 and 80 psi.
We isolate the water at the shutoff valves before removing a faucet handle, cartridge, supply line, drain seal, or stopper linkage. A straightforward cartridge, aerator, stopper, drain seal, or supply line replacement commonly takes about 30 to 60 minutes once the correct part is available. Work involving a discontinued faucet, a corroded valve, damaged cabinet access, or a fixture that must be matched to a special part is usually planned for a return visit after the part is ordered.
Cartridge age and shutoff valves
The age and make of the faucet affect whether a replacement cartridge, handle stem, spray hose, or stopper part is readily available. A common fixture with a removable cartridge is generally more direct to repair than an older faucet with discontinued internal parts or corrosion around the body.
Cabinet access also changes the work. A clear opening below the sink gives us room to reach the drain and supply connections, while a seized shutoff valve, swollen cabinet base, or tightly fitted disposal can add removal and restoration work. If supply piping must be moved or a commercial property requires management approval or municipal sign-off, that also affects the scope before replacement begins.
Faucet model and cabinet access
Before you call, locate the faucet brand and model number if it is printed on the escutcheon plate, spout, installation paperwork, or underside of the fixture. Tell us which room has the problem and whether it is the kitchen sink, bathroom sink, laundry sink, or bar sink. If you know when the faucet or stopper was installed, the approximate age can help us anticipate cartridge and finish differences.
Let us know whether water is running now, whether the cabinet floor is wet, and whether the shutoff valves under the sink still turn. A photo of the faucet, the cabinet interior, and any visible leak can help identify likely parts and access limits. Call Richardson Plumbing Company at (713) 305-9552 before water beneath the sink swells the cabinet base or reaches the wall behind it.
Next: hydro jetting, or back to the home page.